Netgear FS728TP FS728TP User Manual - Page 54
Engine ID, The SNMPv3 Engine ID screen displays
UPC - 606449050226
View all Netgear FS728TP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 54 highlights
FS728TP Smart Switch FS728TP Smart Switch Software Administration Manual Engine ID The SNMPv3 Engine ID screen allows network managers to define the SNMP Engine ID and to assign the default parameters to SNMP. To define the Local Engine ID: 1. Click System > SNMP > SNMPv3 > Engine ID. The SNMPv3 Engine ID screen displays: Figure 3-11 The SNMPv3 Engine ID screen contains the following fields: • Local Engine ID (10-64 Characters) - Enter the local device Engine ID. The field value is a hexadecimal string. Each byte in hexadecimal character strings is two hexadecimal digits. Each byte digit can be separated by a period or a colon. The Engine ID must be defined before SNMPv3 is enabled. • Use Default - Check the box to use the device-generated Engine ID. The default Engine ID is based on the device MAC address and is defined per standard as: - First 4 octets - First bit = 1, the rest is the IANA Enterprise number. - Fifth octet - Set to 3 to indicate the MAC address that follows. - Last 6 octets - MAC address of the device. 2. Specify the Local Engine ID field or check Use Default to use the device-generated Engine ID (Checking Use Default will override any entry in the Local Engine ID field). 3. Click Apply to update the device. Managing System Settings v1.0, December 2007 3-18