Netgear FS728TP FS728TP User Manual - Page 150
Log Filter, Monitoring >, Logs > Log Filter, RAM Logs
UPC - 606449050226
View all Netgear FS728TP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 150 highlights
FS728TP Smart Switch FS728TP Smart Switch Software Administration Manual Log Filter To configure log filters: 1. Click Monitoring > Logs > Log Filter. The Log Filter screen displays: Figure 7-2 The Log Filter screen contains the following fields: • RAM Logs - Select the minimum message severity level to appear in the RAM Log. The following are the available message severity levels: - Emergency - The highest warning level. If the device is down or not functioning properly, an emergency log message is saved to the specified logging location. - Alert - The second highest warning level. An alert log is saved, if there is a serious device malfunction; for example, all device features are down. - Critical - The third highest warning level. A critical log is saved if a critical device malfunction occurs; for example, two device ports are not functioning, while the rest of the device ports remain functional. - Error - A device error has occurred; for example, if a single port is offline. - Warning - The lowest level of a device warning. The device is functioning, but an operational problem has occurred. - Notice - Provides device information. - Informational - Provides device information. - Debug - Provides debugging messages. • Log File - Select the minimum message severity level to appear in the log file. The following are the available message severity levels: Monitoring the Switch 7-3 v1.0, December 2007