Netgear FS728TP FS728TP User Manual - Page 52
Community String, Recipients IP - ip address default
UPC - 606449050226
View all Netgear FS728TP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
FS728TP Smart Switch FS728TP Smart Switch Software Administration Manual To configure SNMPv1/v2 trap station management: 1. Click System > SNMP > SNMPv1/v2 > Trap Configuration. The SNMPv1/v2 Trap Configuration screen displays: Figure 3-10 The SNMPv1/v2 Trap Configuration screen contains the following fields: • Recipients IP - Enter the IP address to which the traps are sent. • Notification Type - (Configurable only if the Notification Version is SNMPv2.) Select the type of notification sent. The possible field values are: - Traps - Traps are sent. - Informs - Informs are sent only when SNMPv2 is enabled. • Community String - Enter the community string of the trap manager. • Notification Version - Select the trap type. The possible field values are: - SNMPv1 - SNMP Version 1 traps are sent. - SNMPv2 - SNMP Version 2c traps are sent. • UDP Port - Enter the UDP port used to send notifications. The default UDP port is 162. • Timeout - Enter the amount of time (in seconds) the device waits before re-sending informs. The default is 15 seconds. • Retries - Enter the amount of times the device re-sends an inform request. The default is 3 seconds. 2. Select the trap entry. 3. Enter the fields in the first row. 4. Click Apply to update the device. Managing System Settings v1.0, December 2007 3-16