Netgear GS308E Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 33
Create 802.1Q-Based VLANs in an Advanced Configuration
![]() |
View all Netgear GS308E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Gigabit Ethernet Smart Managed Plus Switches The Basic 802.1Q VLAN Identifier table displays. The previous figure is an example. Your switch might provide more or fewer ports. 9. Under each port to be added to a VLAN, enter the ID of the VLAN. You can enter a VLAN ID from 1 to 4093. If all the VLANs share an uplink to the Internet or servers, enter all in the VLAN ID field for the port that you want to use for the uplink. Note: If ports are members of the same LAG, you must assign them to the same VLAN. 10. Click the Apply button. Your settings are saved. Create 802.1Q-Based VLANs in an Advanced Configuration In an advanced 802.1Q-based VLAN configuration, you can assign ports on the switch to a VLAN with an ID number in the range of 1-4093 and you can add tagged or untagged ports to a VLAN. In addition, you can use port VLAN IDs (PVIDs). By default, all ports are untagged members of VLAN 1. To create 802.1Q-based VLANs in an advanced configuration: 1. Connect your computer to the same network as the switch. You can use a WiFi or wired network connection, or connect directly to a switch that is off-network using an Ethernet cable. 2. Launch a web browser. 3. In the address field of your web browser, enter the IP address of the switch. If you do not know the IP address of the switch, see Access the Switch Using a Web Browser on page 16. Use VLANS for Traffic 33 Segmentation User Manual
![](/manual_guide/products/netgear-gs305e-gigabit-ethernet-smart-managed-plus-switches-user-manual-a9d21c1/33.png)