Netgear GS308E Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 5

Gigabit Ethernet Smart Managed Plus Switches Specify a Port PVID for an 802.1Q-Based VLAN 36 Chapter 4 Optimize Performance With Quality of Service Enable 802.1p/DSCP-Based Quality of Service 39 Configure Port-Based Quality of Service 40 Set Up Rate Limiting 41 Set Up Broadcast Filtering 42 Chapter 5 Manage Network Settings Specify IP Address Settings for the Switch 46 Use Browser-Based Access to Specify the Switch IP Address...46 Use the ProSAFE Plus Utility to Specify the Switch IP Address.47 Manage Multicast Traffic With IGMP Snooping 48 Customize IGMP Snooping 49 Specify a VLAN for IGMP Snooping 50 Set Up Link Aggregation Groups 51 Chapter 6 Manage and Monitor the Switch Manage Flow Control 55 Manage the Port Speed and the Port Status 56 Enable Loop Detection 57 Manage Power Saving Options 58 Download and Update the Firmware 59 Reboot the Switch 61 Save the Switch Configuration 61 Restore a Saved Switch Configuration 62 Restore Factory Default Settings 63 Manage Access Control 64 Add Devices to the Access Control Table 64 Remove Devices From the Access Control Table 65 Enable Port Mirroring 66 View Switch Information or Change the Switch Device Name.....67 View or Clear the Port Statistics 68 PoE Considerations for Switches That Support PoE 69 Chapter 7 Diagnostics and Troubleshooting Test Cable Connections 72 Resolve a Subnet Conflict to Access the Switch 73 PoE Troubleshooting Suggestions 73 Appendix A Factory Default Settings and Technical Specifications Factory Default Settings 76 Technical Specifications 77 Model GS105Ev2 Technical Specifications 77 5