Netgear GS308E Gigabit Ethernet Smart Managed Plus Switches User Manual - Page 36
Specify a Port PVID for an 802.1Q-Based VLAN
View all Netgear GS308E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Gigabit Ethernet Smart Managed Plus Switches You can select VLAN Membership only if you already enabled the advanced 802.1Q VLAN option (see Create 802.1Q-Based VLANs in an Advanced Configuration on page 33). The previous figure is an example. Your switch might provide more or fewer ports. 7. In the VLAN ID menu, select the VLAN. 8. Select the ports that you want to add to the VLAN by doing the following: a. (Optional) In the Group Operation menu, select Untag All, Tag all, or Remove all. All ports are either added to the VLAN (tagged or untagged) or removed from the VLAN. b. Select individual ports and assign them as tagged (T) or untagged (U) ports or remove individual ports by selecting the check boxes that are associated with the port numbers. By default, all ports are untagged. c. Click the Apply button. Your settings are saved. In the VLAN Membership table, the ports display as members of the VLAN. 9. To select ports for another VLAN, repeat Step 7 and Step 8. 10. To verify your selections, select VLAN > 802.1Q > Advanced > VLAN Configuration. The Advanced 802.1Q VLAN Status page displays. In the VLAN Identifier Setting table, the ports display next to the VLAN or VLANs to which they were added. Specify a Port PVID for an 802.1Q-Based VLAN A default port VLAN ID (PVID) is a VLAN ID tag that the switch assigns to data packets it receives that are not already addressed (tagged) for a particular VLAN. For example, if you connected a computer on port 6 and you want it to be a part of VLAN 2, configure port 6 to automatically add a PVID of 2 to all data received from the computer. This step Use VLANS for Traffic 36 Segmentation User Manual