Netgear GS524T GS524T Reference Manual - Page 17

CHAPTER 4: INSTALLATION This chapter describes the installation procedures for the NETGEAR Model GS524T Copper Gigabit Switch. Preparing the Site Before you begin installing your switch, prepare the installation site. Make sure your operating environment meets the operating environment requirements of the equipment listed in Table 4-1. Table 4-1. Operating Environment Requirements Characteristic Requirements Temperature Ambient temperature between 0 and 40ºC (32 and 104ºF). No nearby heat sources such as direct sunlight, warm air exhausts, or heaters. Operating humidity Maximum relative humidity of 90%, noncondensing. Ventilation Minimum 2 inches (5.08 cm) on all sides for cooling. Adequate airflow in room or wiring closet. Operating conditions At least 6 ft (1.83 m) to nearest source of electromagnetic noise (such as photocopy machine or arc welder). Power Adequate power source within 6 ft (1.83 m). Checking Package Contents Unpack the contents of the package and verify them against the following list: • NETGEAR Model GS524T Gigabit Ethernet Switch • Self-adhesive rubber footpads for desktop installation • Rack Mount Kit for rack installation • AC power cord • Warranty & Owner Registration Card installation 4-1