Netgear GS524T GS524T Reference Manual - Page 32
Patch Panels and Cables
UPC - 606449022803
View all Netgear GS524T manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Patch Panels and Cables If you are using patch panels, make sure that they meet the 100BASE-TX requirements. NETGEAR recommends Category 5e UTP cable for all patch cables and work area cables to ensure that your UTP patch cable rating meets or exceeds the distribution cable rating. To wire patch panels, you need two Category 5e UTP cables with an RJ-45 plug at each end, as shown in Figure C-3. 1 2 1 87654321 87654321 Key: 1 = RJ-45 plug 2 = Category 5e UTP patch cable 5525.1 Figure C-3. Category 5e UTP Patch Cable with Male RJ-45 Plug at Each End Note: Flat "silver satin" telephone cable may have the same RJ-45 plug. However, using telephone cable will result in excessive collisions and cause the attached port to be partitioned or disconnected from the network. cabling guidelines C-6