Netgear GS748TS GS7xxTS Hardware manual - Page 12
Switch Features, Four Small Form-factor Pluggable SFP GBIC slots, which function as combo ports. Combo
UPC - 606449049480
View all Netgear GS748TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
GS700TS Hardware Installation Guide Figure 1-1 Switch Features The following list identifies the key features of the NETGEAR Smart Switch. • 24/48 RJ-45 10/100/1000M auto-sensing Giga switching ports. • Four Small Form-factor Pluggable (SFP) GBIC slots, which function as combo ports. Combo ports are single ports with two physical connections, SFP fiber and RJ-45 copper. The RJ-45 copper ports corresponding to the Combo ports are the four 10/100/1000M auto-sensing Giga switching ports on each device. If both devices are plugged in, the fiber connection is active, with fiber port taking priority if both are connected. • SFP types are supported are: - 1000Base-SX - 1000Base-LX 1-15 v1.0, November 2007 Introduction
GS700TS Hardware Installation Guide
1-15
Introduction
v1.0, November 2007
Switch Features
The following list identifies the key features of the NETGEAR Smart Switch.
•
24/48 RJ-45 10/100/1000M auto-sensing Giga switching ports.
•
Four Small Form-factor Pluggable (SFP) GBIC slots, which function as combo ports. Combo
ports are single ports with two physical connections, SFP fiber and RJ-45 copper. The RJ-45
copper ports corresponding to the Combo ports are the four 10/100/1000M auto-sensing Giga
switching ports on each device. If both devices are plugged in, the fiber connection is active,
with fiber port taking priority if both are connected.
•
SFP types are supported are:
–
1000Base-SX
–
1000Base-LX
Figure 1-1