Netgear GS752TS GS7xxTS-TPS Software Admin Manual - Page 289
Dual Image Configuration, Source Image, Stack Member, Destination Image, Cancel, Apply, Maintenance
View all Netgear GS752TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 289 highlights
GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches To copy an image: 1. Use the Source Image field to select the image on the stack master to use as the source. The source image overwrites the destination image, if it exists. 2. Use the Stack Member menu to select the destination unit to which you are going to copy the image. To copy the selected image from the stack master to all stack members, select All. 3. Use the Destination Image field to determine which image on the stack member(s) to overwrite (if an image currently exists in the selected destination). The image on the stack master is copied to the destination you select. 4. Click Cancel to cancel the configuration on the screen. Reset the data on the screen to the latest value of the switch. 5. Click Apply to initiate the file transfer from the stack master to the selected stack member. Dual Image Configuration The system running a legacy software version will ignore (not load) a configuration file created by the newer software version. When a configuration file created by the newer software version is discovered by the system running an older version of the software, the system will display an appropriate warning to the user. Use the Dual Image Configuration page to set the boot image, configure an image description, or delete an image. To display the Dual Image Configuration page, click Maintenance > File Management > Dual Image > Dual Image Configuration. 289