Netgear GS752TS GS7xxTS-TPS Software Admin Manual - Page 46
System, Management, Denial of Service, > Auto-DoS Configuration, DoS feature, Disable, Enable
View all Netgear GS752TS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches To access the Auto-DoS Configuration page, click System > Management > Denial of Service > Auto-DoS Configuration. To configure the Auto-DoS feature: 1. Select a radio button to enable or disable Auto-DoS: • Disable. Auto-DoS is disabled (default). • Enable. Auto-DoS is enabled. 2. Click Apply to send the updated configuration to the switch. Configuration changes occur immediately. 3. Click Cancel to cancel the configuration on the screen and reset the data on the screen to the latest value of the switch. 46
46
GS728TS, GS728TPS, GS752TS, and GS752TPS Gigabit Smart Switches
To access the Auto-DoS Configuration page, click
System
>
Management
>
Denial of Service
> Auto-DoS Configuration
.
To configure the Auto-
DoS feature:
1.
Select a radio button to enable or disable Auto-DoS:
•
Disable
. Auto-DoS is disabled (default).
•
Enable
. Auto-DoS is enabled.
2.
Click
Apply
to send the updated configuration to the switch. Configuration changes occur
immediately.
3.
Click
Cancel
to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.