Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P Administration Manual - Page 208
Color Conform Policy, CLI: Con a Color Conform Policy
View all Netgear GSM7212P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 208 highlights
ProSafe Managed Switch Color Conform Policy This example shows how to create a policy to police the traffic to a committed rate. The packets with IP precedence value of 7 are colored green to ensure that these packets are the last to be dropped when there is congestion. The example is shown as CLI commands and as a Web interface procedure. CLI: Configure a Color Conform Policy 1. Create a VLAN 5 and configure ports 1/0/13 and 1/0/25 as its members. (Netgear Switch) #vlan database (Netgear Switch) (Vlan)#vlan 5 (Netgear Switch) (Vlan)#exit (Netgear Switch) #config (Netgear Switch) (Config)#interface 1/0/13 (Netgear Switch) (Interface 1/0/13)#vlan participation include 5 (Netgear Switch) (Interface 1/0/13)#vlan tagging 5 (Netgear Switch) (Interface 1/0/13)#exit (Netgear Switch) (Config)#interface 1/0/25 (Netgear Switch) (Interface 1/0/25)#vlan participation include 5 (Netgear Switch) (Interface 1/0/25)#vlan tagging 5 (Netgear Switch) (Interface 1/0/25)#exit 2. Create classes class_vlan and class_color. Note: DiffServ service is enabled by default. (Netgear Switch) (Config)#class-map match-all class_vlan (Netgear Switch) (Config-classmap)#match vlan 5 (Netgear Switch) (Config-classmap)#exit (Netgear Switch) (Config)#class-map match-all class_color (Netgear Switch) (Config-classmap)#match ip precedence 7 (Netgear Switch) (Config-classmap)#exit 3. Create a policy to police the traffic to a rate of 1000 kbps with an allowed burst size of 64 KB. Furthermore, the packets with IP precedence value of 7 will be colored green. That 208 | Chapter 12. DiffServ