Netgear GSM7212P GSM5212P/GSM7212P/GSM7212F/GSM7224P Administration Manual - Page 9
VLANs, Virtual LANs
View all Netgear GSM7212P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
2. VLANs 2 Virtual LANs This chapter provides the following examples: • Create Two VLANs on page 10 • Assign Ports to VLAN2 on page 12 • Assign Ports to VLAN3 on page 13 • Assign VLAN3 as the Default VLAN for Port 1/0/2 on page 15 • Create a MAC-Based VLAN on page 16 • Create a Protocol-Based VLAN on page 19 • Virtual VLANs: Create an IP Subnet-Based VLAN on page 21 • Voice VLANs on page 24 Adding virtual LAN (VLAN) support to a Layer 2 switch offers some of the benefits of both bridging and routing. Like a bridge, a VLAN switch forwards traffic based on the Layer 2 header, which is fast. Like a router, it partitions the network into logical segments, which provides better administration, security, and management of multicast traffic. A VLAN is a set of end stations and the switch ports that connect them. You can have different reasons for the logical division, such as department or project membership. The only physical requirement is that the end station and the port to which it is connected both belong to the same VLAN. Each VLAN in a network has an associated VLAN ID, which appears in the IEEE 802.1Q tag in the Layer 2 header of packets transmitted on a VLAN. An end station might omit the tag, or the VLAN portion of the tag, in which case the first switch port to receive the packet can either reject it or insert a tag using its default VLAN ID. A given port can handle traffic for more than one VLAN, but it can support only one default VLAN ID. The Private Edge VLAN feature lets you set protection between ports located on the switch. This means that a protected port cannot forward traffic to another protected port on the same switch. The feature does not provide protection between ports located on different switches. The diagram in this section shows a switch with four ports configured to handle the traffic for two VLANs. Port 1/0/2 handles traffic for both VLANs, while port 1/0/1 is a member of VLAN 2 only, Chapter 2. VLANs | 9