Netgear GSM7252PS ProSafe Managed Switch Web Management User Manual - Page 187
Fast Leave Admin Mode, Multicast Router Expiry Time
![]() |
UPC - 606449071665
View all Netgear GSM7252PS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 187 highlights
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual MLD VLAN Configuration To access the MLD VLAN Configuration page, click Switching Multicast MLD Snooping MLD VLAN Configuration. 1. Use VLAN ID to set the VLAN IDs for which MLD Snooping is enabled. 2. Use Admin Mode to enable MLD Snooping for the specified VLAN ID. 3. Use Fast Leave Admin Mode to enable or disable the MLD Snooping Fast Leave Mode for the specified VLAN ID. 4. Use Group Membership Interval to set the value for group membership interval of MLD Snooping for the specified VLAN ID. Valid range is (Maximum Response Time + 1) to 3600. 5. Use Maximum Response Time to set the value for maximum response time of MLD Snooping for the specified VLAN ID. Valid range is 1 to (Group Membership Interval - 1).Its value should be less than group membership interval value. 6. Use Multicast Router Expiry Time to set the value for multicast router expiry time of MLD Snooping for the specified VLAN ID. Valid range is 0 to 3600. Chapter 3. Configuring Switching Information | 187
![](/manual_guide/products/netgear-gsm7252ps-prosafe-managed-switch-web-management-user-manual-5064011/187.png)