Netgear GSM7252PS ProSafe Managed Switch Web Management User Manual - Page 505
Dynamic ARP Inspection, DAI Configuration
UPC - 606449071665
View all Netgear GSM7252PS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 505 highlights
ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual Dynamic ARP Inspection The Dynamic ARP Inspection (DAI) folder contains links to the following features: • DAI Configuration on page 505 • DAI VLAN Configuration on page 506 • DAI Interface Configuration on page 507 • DAI ACL Configuration on page 508 • DAI ACL Rule Configuration on page 509 • DAI Statistics on page 510 DAI Configuration To display the DAI Configuration page, click Security Control> Dynamic ARP Inspection DAI Configuration. 1. Use Validate Source MAC to choose the DAI Source MAC Validation Mode for the switch by selecting Enable or Disable radio button. If you select Enable, Sender MAC validation for the ARP packets will be enabled. The factory default is disable. 2. Use Validate Destination MAC to choose the DAI Destination MAC Validation Mode for the switch by selecting Enable or Disable radio button. If you select Enable, Destination MAC validation for the ARP Response packets will be enabled. The factory default is disable. 3. Use Validate IP to choose the DAI IP Validation Mode for the switch by selecting Enable or Disable radio button. If you select Enable, IP Address validation for the ARP packets will be enabled. The factory default is disable. Chapter 6. Managing Device Security | 505