Netgear GSM7252PS ProSafe Managed Switch Web Management User Manual - Page 299

ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual OSPFv3 Configuration Use the OSPFv3 Configuration page to activate and configure OSPFv3 for a switch. To display the OSPFv3 Configuration page, click Routing OSPFv3 Advanced  OSPFv3 Configuration. Default Route Advertise 1. Use Default Information Originate to enable or disable Default Route Advertise. Note that the values for 'Always', 'Metric' and 'Metric Type' can only be configured after Default Information Originate is set to enable. If Default Information Originate is set to enable and values for 'Always', 'Metric' and 'Metric Type' are already configured, then setting Default Information Originate back to disable will set the 'Always', 'Metric' and 'Metric Type' values to default. 2. Use Always to set the router advertise when set to "True". 3. Use Metric to specify the metric of the default route. The valid values are 0 to 16777214. 4. Use Metric Type to set the metric type of the default route. Valid values are External Type 1 and External Type 2. Chapter 4. Routing | 299