Netgear GSM7252PS ProSafe Managed Switch Web Management User Manual - Page 522

ProSafe® Gigabit L3 Managed Stackable Switches Software Administration Manual Captive Portal Trap Flags Use this page to configure whether or not SNMP traps are sent from the Captive Portal and to specify captive portal events that will generate a trap. All CP SNMP traps are disabled by default. To display the Captive Portal Trap Flags page, click Security  Control> Captive Portal  CP Trap Flags. 1. CP Trap Mode - Displays the captive portal trap mode status. To enable or disable the mode, use the System > SNMP>SNMPv1/v2>Trap Flags page. 2. If you enable the Client Auth Failure field, the SNMP agent sends a trap when a client attempts to authenticate with a captive portal but is unsuccessful. 3. If you enable the Client Connect field, the SNMP agent sends a trap when a client authenticates with and connects to a captive portal. 4. If you enable the Client DB Full field, the SNMP agent sends a trap each time an entry cannot be added to the client database because it is full. 5. If you enable the Client Disconnect field, the SNMP agent sends a trap when a client disconnects from a captive portal. 522 | Chapter 6. Managing Device Security