Netgear MA401 MA401 Reference Manual - Page 36
indicates the card is turned off or not fully plugged in., Troubleshooting Tips,
UPC - 606449021837
View all Netgear MA401 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 36 highlights
Reference Guide for the Model MA401 802.11b Wireless PC Card Configure your wireless adapter. a. The MA401 default settings are as follows: • SSID: Wireless • Mode (Infrastructure or Ad Hoc): Infrastructure • WEP encryption not enabled. b. Click on the System Tray icon to run the wireless LAN configuration utility you just installed to verify your settings and make whatever configuration changes may be needed Note: If your WLAN settings are different from the Netgear default settings, you will not get a connection. Configure your MA401 accordingly. MA401 Configuration Utility Verify wireless connectivity to your network. The MA401 has an LED labeled LINK that indicates the wireless link condition of the station. Solid green indicates a good connection. Blinking indicates attempting to connect. Off indicates the card is turned off or not fully plugged in. Verify connectivity by accessing the Internet or network resources. Note: If you cannot connect, please see the "Troubleshooting Tips" on page 2-29. Also, for problems with accessing network resources, the Windows Client and File and Print Sharing software might not be installed and configured properly on your computers. Please refer to "Preparing Your PCs for Network Access" on page C-1. 2-18 Installing the MA401 802.11b Wireless PC Card