Netgear MBR624GU MBR624GU User Manual - Page 16
Front Panel, Table 1-1., LED Descriptions - manual
UPC - 606449061215
View all Netgear MBR624GU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
3G Broadband Wireless Router MBR624GU User Manual Front Panel The router front panel shown below contains status LEDs. 1 2 34 5 Figure 1-1 You can use the LEDs to verify various conditions. The following table describes each LED.. Table 1-1. LED Descriptions LED 1. Power, factory reset Activity Solid green Solid red Off Factory reset Solid green Blinking green 2. Ethernet Solid Amber ports 1-4 Blinking amber Off Solid green 3. Wireless Blinking green Off Description Power is supplied to the router. POST (Power-On Self-Test) failure or device malfunction. Power is not supplied to the router. During a reset, lights momentarily, blinks red three times, and then turns green as the gateway resets to the factory defaults. The powered device is connected to the associated Ethernet Local Area Network (LAN) port, which is operating at 100 Mbps. Data is being transmitted or received at 100 Mbps. The powered device is connected to the associated Ethernet Local Area Network (LAN) port, which is operating at 10 Mbps. Data is being transmitted or received at 10 Mbps. No link is detected on this port, or no cable or no powered device is connected to the associated port. The wireless access point is enabled. Data is being transmitted or received over the wireless link. The wireless access point is disabled. 1-2 Installing Your Router v1.1, March 2009