Netgear MBR624GU MBR624GU User Manual - Page 65
Table 4-1., Router Status Fields, Managing Your Network - 3g mobile broadband wireless router
UPC - 606449061215
View all Netgear MBR624GU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
3G Broadband Wireless Router MBR624GU User Manual Table 4-1. Router Status Fields Field Description Firmware Version This field displays the router firmware version. HSDPA (High-Speed Downlink Packet Access) Modem Identity Modem sw version Modem driver version Shows the modem in use. The software version of the modem. The driver version of the modem. IMSI International Mobile Subscriber Identity. SIM card identity. IMEI International Mobile Equipment Identity. Unique identity of the 3G modem. Operator The ISP for the broadband wireless network. Network mode The mode of the current network the 3G modem is connected to. This is dependent on coverage and distance from the cell site. WAN Port Connection Status The status of the Internet connection. IP Address The IP address used by the modem. If no address is shown, the router cannot connect to the Internet. Protocol The protocol for the Internet connection, which is PPP (Point-toPoint). IP Subnet Mask The IP subnet mask used by the router's USB port. Gateway IP Address The IP address used by the router. Domain Name Server The DNS server IP addresses used by the router. These addresses are usually obtained dynamically from the ISP. LAN Port MAC Address The Ethernet MAC address used by the router's LAN port. IP Address The LAN port IP address. The default is 192.168.0.1. DHCP • Off: The router will not assign IP addresses to PCs on the LAN. • On: The router assigns IP addresses to PCs on the LAN. IP Subnet Mask The LAN port IP subnet mask. The default is 255.255.255.0. Wireless Port (See "Manually Configuring Your Wireless Settings" on page 2-4. Name (SSID) Region Channel Wireless AP The service set ID, also known as the wireless network name. The country where the unit is set up for use. The current channel, which determines the operating frequency. Indicates if the access point feature is disabled or not. If not enabled, the Wireless LED on the front panel will be off. Broadcast Name Indicates if the router is configured to broadcast its SSID. Managing Your Network 4-5 v1.1, March 2009