Netgear RN10200 Software Manual - Page 122
Initialize and Format LUNs, To initialize and format LUNs in the LUN group, Action > Refresh
View all Netgear RN10200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 122 highlights
ReadyNAS OS 6.1 Initialize and Format LUNs After you set up initiator access to the LUN group, you must initialize and format each LUN in the LUN group. For more information about setting up initiator access, see Set Up Initiator Access on page 116. The following procedure uses the Microsoft iSCSI Software Initiator, which is freely available online and is integrated in Windows 7. Note: If you use an operating system other than Windows, the steps are different, but the basic tasks remain the same. To initialize and format LUNs in the LUN group: 1. Open the Windows Disk Management application. Each LUN in the LUN group displays as an unallocated disk that needs to be initialized and formatted. Tip: If the disks do not display, select Action > Refresh in the Disk Management window. 2. Initialize unallocated disks: a. Select an unallocated disk by clicking it. b. In the Disk Management window, select Action > All Tasks > Initialize Disk. LUNs 122