Netgear RN10200 Software Manual - Page 176
Con the Ethernet Interfaces, Con General and TCP/IP Settings
View all Netgear RN10200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 176 highlights
ReadyNAS OS 6.1 If you selected the option to assign an IP address automatically when you configured your Ethernet settings, the DNS fields are populated with the DNS settings from your DHCP server and cannot be edited. If you selected the option to assign an IP address manually when you configured your Ethernet settings, you must manually specify the IP addresses of the DNS servers and the domain name to access your ReadyNAS system over the Internet. Your network administrator can help you determine your Domain Name Server IP address. Configure the Ethernet Interfaces All ReadyNAS systems provide at least one physical Ethernet interface. On ReadyNAS systems with two or more Ethernet interfaces, the interfaces can be used independently as individual links or combined into a bonded adapter. Bonding can provide redundancy or increased throughput. For each Ethernet interface, you can configure the following settings: • VLAN membership • IPv4 and IPv6 settings • DNS servers The following table shows the default network configuration. Table 8. Default network settings Item Default Setting Physical Ethernet interface MTU 1500 VLAN ID 0 TCP/IP • IPv4 using DHCP • IPv6 using DHCP DNS No server Configure General and TCP/IP Settings To configure an Ethernet interface: 1. Select Network > Links. 2. Select the Ethernet interface that you want to configure: • Ethernet interfaces with active links are colored green. • Ethernet interfaces with inactive links are colored gray. System Settings 176