Netgear RN10200 Software Manual - Page 185
Con the TCP/IP settings as explained in the following table.
View all Netgear RN10200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 185 highlights
ReadyNAS OS 6.1 The bond settings pop-up screen displays. 4. Configure the settings in the General tab as explained in the following table: Item Description Name MTU Cannot be edited. Displays the name of the bonded adapter. Enter the MTU in bytes. The default setting is 1500 bytes. VLAN ID Enter a VLAN ID. The default setting ID is 0. Note: If you use VLAN IDs, the switch to which you connect the ReadyNAS system must support VLAN tagging. 5. Click the TCP/IP tab. 6. Configure the TCP/IP settings as explained in the following table. System Settings 185
System Settings
185
ReadyNAS OS 6.1
The bond settings pop-up screen displays.
4.
Configure the settings in the General tab as explained in the following table:
Item
Description
Name
Cannot be edited. Displays the name of the bonded adapter.
MTU
Enter the MTU in bytes. The default setting is 1500 bytes.
VLAN ID
Enter a VLAN ID. The default setting ID is 0.
5.
Click the
TCP/IP
tab.
6.
Configure the TCP/IP settings as explained in the following table.
Note:
If you use VLAN IDs, the switch to which you connect the ReadyNAS
system must support VLAN tagging.