Netgear RNDX400E ReadyNAS NVX User Manual - Page 42
Working with USB Volumes, USB_FLASH_1, USB_HDD_1
UPC - 606449068344
View all Netgear RNDX400E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
ReadyNAS NVX Business Edition User Manual To configure an iSCSI target volume on the ReadyNAS, go to Volumes > Volume Settings > iSCSI. Figure 2-25 Enable iSCSI support, click the Create iSCSI Target button, and enter the desired name of the target and the capacity you wish to reserve for this target device. Maximum capacity is slightly less than the full free space on the ReadyNAS or 2 TB, whichever is less. If you wish to enable authentication for access, enable CHAP authentication and specify the user name and password. The password needs to be at least 12 characters long. Go to this link on ReadyNAS.com for instructions on setting up iSCSI access via initiators in various operating systems. Working with USB Volumes USB storage devices are shared using the name of the device appended with the partition number. You can change the base device name in Volumes > USB Storage, if you want. The USB tab displays the USB disk and flash devices connected to the ReadyNAS NVX Business Edition, and offers various options for these devices. A flash device appears as USB_FLASH_1 and a disk device appears as USB_HDD_1. If you have multiple devices, they appear appended by 2-22 Setting Up and Managing Your ReadyNAS NVX v1.1, February 2009