Netgear WAG302 WAG302v1 Reference Manual - Page 23
Table 1-1., Front Panel LED Indicators, The following table explains the LED indicators - software
View all Netgear WAG302 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
ProSafe Dual Band Wireless Access Point WAG302 Reference Manual (802.11a/g) The following table explains the LED indicators: Table 1-1. Front Panel LED Indicators Item 1 2 3 4 5 6 LED DESCRIPTION PWR Power Indicator Off No power. On Power is on. TEST Self Test Indicator Blink Indicates self test, loading software, or system fault (if continues). Note: This LED may blink for a minute before going off. 100 Ethernet LAN Speed Indicator Off Indicates 10 Mbps Ethernet link detected On (Green) 100 Mbps Fast Ethernet link detected. LINK/ACT LAN Ethernet LAN Link Activity Indicator Off Indicates no Ethernet link detected. On (Green) 100 Mbps Fast Ethernet link detected, no activity. Blink (Green) Indicates data traffic on the 100Mbps Ethernet LAN. On (Amber) 10 Mbps Ethernet link detected, no activity. Blink (Amber) Indicates data traffic on the 10Mbps Ethernet LAN. 802.11a WLAN Wireless LAN Link Activity Indicator (5 GHz) Off Indicates no wireless link activity. Blink (Green) Wireless link activity. 802.11g WLAN Wireless LAN Link Activity Indicator (2.4 GHz) Off Indicates no wireless link activity. Blink (Green) Wireless link activity. Introduction 1-7 v2.0, May 2006