Netgear WAG302 WAG302v1 Reference Manual - Page 34
Logging In Using the Default IP Address, Open a Web browser such as Mozilla Firefox
![]() |
View all Netgear WAG302 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
ProSafe Dual Band Wireless Access Point WAG302 Reference Manual (802.11a/g) ProSafe 802.11a/g Dual Band Wireless Access Point WAG302. If they do not match, no wireless connection will be made. Note: If you are unable to connect, see Chapter 5, "Troubleshooting." Logging In Using the Default IP Address After you install the WAG302, log in to the wireless access point to configure the basic settings and the wireless settings. The WAG302 is set, by default, with the IP address of 192.168.0.230 with DHCP disabled. Note: The computer you are using to connect to the WAG302 should be configured with an IP address that starts with 192.168.0.x and a Subnet Mask of 255.255.255.0. To log in using the default IP Address: 1. Open a Web browser such as Mozilla Firefox, Internet Explorer or Netscape Navigator. 2. Connect to the WAG302 by entering its default address of http://192.168.0.230 into your browser. Figure 2-7 2-10 v2.0, May 2006 Basic Installation and Configuration
![](/manual_guide/products/netgear-wag302-wag302v1-reference-manual-31a4291/34.png)