Netgear WG302 WG302v1 Reference Manual - Page 65
Configuring Wireless LAN Parameters, Advanced Wireless Settings screen, Table 5-1.
UPC - 606449030365
View all Netgear WG302 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
Reference Manual for the NETGEAR ProSafe Wireless Access Point 802.11g WG302 Configuring Wireless LAN Parameters The default advanced wireless LAN parameter settings usually work well. If you want the AP to operate in Supger-G mode, use this feature. Figure 5-4: Advanced Wireless Settings screen The table below describes the advanced wireless parameters. Table 5-1. Advanced Wireless LAN Settings Fields Field Description RTS Threshold Fragmentation Length Beacon Interval DTIM Interval Preamble Type Antenna The packet size used to determine whether it should use the CSMA/CD (Carrier Sense Multiple Access with Collision Detection) or the CSMA/CA (Carrier Sense Multiple Access with Collision Avoidance) mechanism for packet transmission. This is the maximum packet size used for fragmentation. Packets larger than the size programmed in this field will be fragmented. The Fragment Threshold value must be larger than the RTS Threshold value. Specifies the data beacon rate between 20 and 1004. The Delivery Traffic Indication Message specifies the data beacon rate between 1 and 255. A long transmit preamble may provide a more reliable connection or slightly longer range. A short transmit preamble gives better performance. Long is the default Select the desired antenna for transmitting and receiving. Auto is the default. Advanced Configuration 5-5 September 2004