Netgear WGE111 WGE111 Reference Manual - Page 28
Select the Infrastructure and/or Ad-Hoc, mode network settings., password - default password
View all Netgear WGE111 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
User Manual for the NETGEAR WGE111 Wireless Game Adapter Select the Infrastructure and/or Ad-Hoc mode network settings. Note: You can fill in both sections and the configuration used will be determined by the physical placement of the switch on the back of the wireless game adapter. • Fill in the Infrastructure settings. The default SSID is ANY. • Select your country/region from the drop-down list. • Security is disabled by default. Enter the security settings of your network: - Disable - usually used for first time network configuration. - WEP 64 Bit or WEP 128 Bit- select the Authentication type (Auto, Open System, or Shared Key). • For networks that use a passphrase: enter the passphrase and click Generate to generate the key. • For networks that use manually entered keys: enter the key. - For WPA-PSK - type a Passphrase. Note: Be careful to enter the passphrase or key information accurately. • To configure Ad-Hoc mode also, select the Ad-hoc Mode check box and configure the Ad-Hoc settings. • Click Next to proceed. Select the Change Password check box and type the old password for the WGE111 Wireless Game Adapter. The default password is password. Type a new password and then type it again in the Confirmation box. Click Next. 3-12 Select the Infrastructure or Ad-Hoc settings Enter the security settings of your network Change the Password Basic Setup