Netgear WGR614v8 WGR614v8 Setup Manual - Page 18

Check the router status lights to verify correct router operation., To Verify Basic Functioning - support

Get Netgear WGR614v8 - 54 Mbps Wireless Router PDF manuals and user guides View all Netgear WGR614v8 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 18 highlights

Router Setup Manual Check the router status lights to verify correct router operation. If the Power light does not turn solid green within 2 minutes after turning the router on, reset the router according to the instructions in "Restoring the Default Configuration and Password" on page 2-6. To Verify Basic Functioning After you turn on power to the router, the following sequence of events should occur: 1. When power is first applied, verify that the Power light is on (see "The Front of the Router" on page 1-2 for an illustration). 2. Verify that the Test light lights within a few seconds, indicating that the self-test procedure is running. 3. After approximately 20 seconds, verify that: a. The Test light turned off. b. The LAN port lights are lit for any local ports that are connected. c. The Internet port is connected and its light is lit. d. The Wireless port light is lit. If a port's light is lit, a link has been established to the connected device. If a LAN port is connected to a 100 Mbps device, verify that the port's light is green. If the port is 10 Mbps, the light will be amber. Power Light Not On If the Power and other lights are off, check the following: • Make sure that the power cord is properly connected to your router and that the power supply adapter is properly connected to a functioning power outlet. • Check that you are using the power adapter supplied by NETGEAR for this product. If the error persists, you have a hardware problem and should contact technical support. 2-2 Troubleshooting v2.0, May 2007

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
Router Setup Manual
2-2
Troubleshooting
v2.0, May 2007
Check the router status lights to verify correct router operation.
If the Power light does not turn solid green within 2 minutes after turning the router on, reset the
router according to the instructions in
“Restoring the Default Configuration and Password” on
page 2-6
.
To Verify Basic Functioning
After you turn on power to the router, the following sequence of events should occur:
1.
When power is first applied, verify that the Power light is on (see
“The Front of the Router” on
page 1-2
for an illustration).
2.
Verify that the Test light lights within a few seconds, indicating that the self-test procedure is
running.
3.
After approximately 20 seconds, verify that:
a.
The Test light turned off.
b.
The LAN port lights are lit for any local ports that are connected.
c.
The Internet port is connected and its light is lit.
d.
The Wireless port light is lit.
If a port’s light is lit, a link has been established to the connected device. If a LAN port is
connected to a 100 Mbps device, verify that the port’s light is green. If the port is 10 Mbps, the
light will be amber.
Power Light Not On
If the Power and other lights are off, check the following:
•
Make sure that the power cord is properly connected to your router and that the power supply
adapter is properly connected to a functioning power outlet.
•
Check that you are using the power adapter supplied by NETGEAR for this product.
If the error persists, you have a hardware problem and should contact technical support.