Netgear WNR834B WNR834Bv2 Reference Manual - Page 37
Configuring WEP Wireless Security, From the Security Options menu
UPC - 606449041415
View all Netgear WNR834B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
NETGEAR RangeMax™ NEXT Wireless Router WNR834B User Manual with the correct Passphrase. Similarly, when you use WPA2-PSK, the other devices in the network will not connect unless they are also set to WPA2-PSK and are configured with the correct Passphrase. Use the procedures described in the following sections to configure the WNR834B. Store this information in a safe place. Configuring WEP Wireless Security To configure WEP data encryption, follow these steps: Note: If you use a wireless computer to configure WEP settings, you will be disconnected when you click Apply. You must then either configure your wireless adapter to match the wireless router WEP settings or access the wireless router from a wired computer to make any further changes. 1. From the main menu of the browser interface, under Setup, click Wireless Settings. 2. From the Security Options menu, select WEP. The WEP options display. 3. Select the Authentication Type and Encryption strength. Safeguarding Your Network 2-7 v2.1, July 2007