Netgear XAV2001 XAV2001 User Manual - Page 13
Connecting a Powerline AV Ethernet Adapter to the Router, The Powerline LED is lit. - lights
UPC - 606449066456
View all Netgear XAV2001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
XAV2001 Powerline AV Ethernet Adapter User Manual Connecting a Powerline AV Ethernet Adapter to the Router 1. Plug a Powerline AV Ethernet Adapter into a power outlet near your router. Use the supplied gray Ethernet cable to connect from the Adapter to a LAN port on your router so that the Powerline network can gain access to the Internet. The Power and Ethernet lights on the Powerline AV Ethernet Adapter should turn on. Note: It is not necessary to disconnect your router from your computer. Router XAV2001 Powerline AV Ethernet Adapter Supplied Ethernet cable Laptop PC Desktop PC Figure 1-3 Connecting the XAV2001 to a Router 2. Once plugged in and power is first applied, check to see that the Power light is on. 3. After approximately 10 seconds, check to see that: a. The Power light is solid green. b. The Powerline LED is lit. c. The Ethernet light is on or blinks. Installation and Basic Configuration 1-5 v1.0, November 2009