Netgear XAV2001 XAV2001 User Manual - Page 30
Advanced Settings, QoS Setup, Apply, To set the priority of data transfers by the type of protocol
UPC - 606449066456
View all Netgear XAV2001 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
XAV2001 Powerline AV Ethernet Adapter User Manual To set the priority of data transfers by the type of protocol: 1. Start the XAV2001 Powerline Utility and wait for the utility to detect the Powerline AV Ethernet Adapters connected to the network. 2. From the Advanced Settings tab, the Advanced Settings tab, click the QoS arrow. 3. To set the traffic prioritization rule into the selected Powerline AV Ethernet Adapter device, specify the priority in the QoS Setup section of the screen. Figure 2-11 4. Click Apply. Note: QoS settings are applied only to the device that is selected on the QoS tab. These options only apply to QoS-configured business networks. IEEE 802.1p uses prioritization bits in Layer-2 frames. Type of Service routing (ToS) uses prioritization bits in Layer-3 IP packets. The deprecated ToS values range from 0 to 7. 2-14 Using the XAV2001 Powerline Utility v1.0, November 2009