Home » Netgear Manuals » Power » Netgear XAVB5421 » Manual Viewer

Netgear XAVB5421 User Manual - Page 43

power, use a surge suppressor, line conditioner, or uninterruptible power supply UPS.

Add to My Manuals
Save this manual to your list of manuals

Page 43 highlights

Powerline PassThru Adapter • Observe extension cable and power strip ratings. Make sure that the total ampere rating of all products plugged into the extension cable or power strip does not exceed 80 percent of the ampere ratings limit for the extension cable or power strip. • To help protect your system from sudden, transient increases and decreases in electrical power, use a surge suppressor, line conditioner, or uninterruptible power supply (UPS). • For additional safety instructions, visit http://www.netgear.com/about/regulatory. Supplemental Information 43

Section	Page
Powerline PassThru Adapters	1
Contents	3
1. Getting Started	5
Hardware Features	6
XAVB5401 Powerline 500 PassThru One-Port Adapter	6
XAVB5421Powerline 500 PassThru One-Port Adapter	7
XAVB5602 Powerline 500 Nano PassThru Two-Port Adapter	8
XAVB5622 Powerline 500 Nano PassThru Two-Port Adapter	9
XAVB6504 Powerline 600 PassThru Four-Port Adapter	10
LED Descriptions	11
Button Descriptions	11
Ethernet Port	11
Extra Outlet	12
Product Label	12
How the Powerline PassThru Adapter Fits into Your Network	12
Set Up the Powerline Network	14
Set Up a New Powerline Network	14
Add the Adapter to an Existing Powerline Network	15
Powerline Network Security	16
Use the Security Button to Set the Encryption Key	16
2. Using NETGEAR genie	18
Install NETGEAR genie	19
Powerline Map	20
Security Icon	21
View the Link Rate Between Powerline Devices	22
Change the Name of a Powerline Device	23
Turn LEDs Off or On	24
Set the Powerline Encryption Key	24
Reset a Device to Factory Default Settings	26
Add a Device to the Powerline Network	27
3. Troubleshooting	29
Basic Functioning	30
Troubleshooting Buttons	30
Troubleshooting LEDs	30
LEDs Are Off When the Powerline Device Is Plugged In	30
Power LED	30
Pick A Plug LED	31
Ethernet LED Is Off	31
If You Do Not See All Your Devices with the NETGEAR genie	32
If You Do Not See the Powerline Icon on Your Network Map	32
Symantec Endpoint Protection	32
A. Supplemental Information	36
XAVB5401 Technical Specifications	37
XAVB5421 Technical Specifications	38
XAVB5602 Technical Specifications	39
XAVB5622 Technical Specifications	40
XAVB6504 Technical Specifications	41

Match case Limit results 1 per page

Supplemental Information

Powerline PassThru Adapter

•

Observe extension cable and power strip ratings. Make sure that the total ampere rating

of all products plugged into the extension cable or power strip does not exceed 80

percent of the ampere ratings limit for the extension cable or power strip.

•

To help protect your system from sudden, transient increases and decreases in electrical

power, use a surge suppressor, line conditioner, or uninterruptible power supply (UPS).

•

For additional safety instructions, visit

http://www.netgear.com/about/regulatory