Netgear XSM4348CS Hardware Installation Guide - Page 30
Table 2. LEDs of the 1G models with 10G uplinks Continued, Hardware Installation Guide
![]() |
View all Netgear XSM4348CS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
M4300 Intelligent Edge Series Fully Managed Stackable Switches Table 2. LEDs of the 1G models with 10G uplinks (Continued) LED Description PoE models 1000BASE-T RJ-45 port LEDs (two LEDs per ports) PoE models, left side PoE status LED: Off. A PD is not connected to the port. Solid green. A PoE-powered device (PD) is connected and the port is supplying power successfully. Solid yellow. Indicates one of the following failures, which prevents the port from supplying power: • A short circuit occurred on the PoE power circuit. • The PoE power demand exceeds the available power. • The PoE current exceeds the PD's classification. • An out-of-proper-voltage band condition occurred. PoE models, right side speed, activity, and link LED: Off. No link is established on the copper port. Solid green. The copper port established a 1000 Mbps link. Blinking green. The port is transmitting or receiving packets at 1000 Mbps. Solid yellow. The copper port established a 10 or 100 Mbps link. Blinking yellow. The port is transmitting or receiving packets at 10 or 100 Mbps. 10GBASE-T RJ-45 port LED (one LED per port) Off. No link is established on the copper port. Solid green. The copper port established a 10 Gbps link. Blinking green. The copper port is transmitting or receiving packets at 10 Gbps. Solid yellow. The copper port established a 1 Gbps or 100 Mbps link. Blinking yellow. The copper port is transmitting or receiving packets at 1 Gbps or 100 Mbps. 10GBASE-X SFP+ port LED (one LED per port) Off. No SFP module link is established on the fiber port. Solid green. The fiber port established a 10 Gbps link. Blinking green. The fiber port is transmitting or receiving packets at 10 Gbps. Solid yellow. The fiber port established a 1 Gbps link. Blinking yellow. The fiber port is transmitting or receiving packets at 1 Gbps. OOB Ethernet port LEDs (two LEDs per port) Left side speed LED: Solid green. The port established a 1000 Mbps link. Solid yellow. The port established a 10 or 100 Mbps link. Off. No link is established on the port. Right side activity and link LED: Solid green. The port established a link. Blinking green. The port is transmitting or receiving packets. Off. No link is established on the port. Hardware Overview 30 Hardware Installation Guide
![](/manual_guide/products/netgear-m43008x8f-hardware-installation-guide-dd95ea2/30.png)