Netgear XWNB5221 Installation Guide - Page 13
Troubleshooting Tips - manual
![]() |
View all Netgear XWNB5221 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Troubleshooting Tips Power LED is off. Power LED is blinking amber. Pick A Plug LED is off. Pick A Plug LED is amber or red. Make sure that power is supplied to the electrical outlet, and that the Powerline devices are not plugged into an extension cord, power strip, or surge protector. Power saving mode occurs when the Ethernet LED is off. This can occur in the following circumstances: • The Ethernet cable is unplugged. • The device connected through the Ethernet cable is turned off. • The adapter is idle for 10 minutes. It returns to normal mode within two seconds after the Ethernet link is up. • If you set network security, make sure that all Power line devices are using the same encryption key. For more information, see the online user manual. • Press the Factory Reset button on each device for one second to return the Powerline adapter to its factory default settings. Move the Powerline device closer to the other Powerline devices. 13
![](/manual_guide/products/netgear-xwnb5221-installation-guide-3ccf4ae/13.png)