Netgear XWNB5221 Installation Guide - Page 6

Wireless LED Solid. The Powerline wireless access point is securely paired with the wireless network client. Blinking. The Powerline wireless access point is pairing with the wireless network client. Factory Reset button Press the Factory Reset button for one second, then release it to return the Powerline adapter to its factory default settings. Ethernet port Connect your computers, networking equipment, and other equipment that uses an Ethernet cable to your Powerline network. On/Off switch Slide to turn the adapter off or on. Security button Use the Security button to create a secure Powerline network. On your WiFi access point, use the Security button both to create a secure Powerline network and to let your wireless clients join the wireless network. Warning: Do not press the Security button on the Powerline adapter until installation is complete and the adapters are communicating with each other (indicated by the blinking Pick A Plug LED). Pressing this button too soon can temporarily disable Powerline communication. If this occurs, use the Factory Reset button to return the Powerline adapter to its factory default settings. 6