Nikon 25434 D3 User's Manual - Page 249
Using a GPS Unit
UPC - 018208254347
View all Nikon 25434 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 249 highlights
Using a GPS Unit Optional Garmin GPS units that conform to version 2.01 or 3.01 of the National Marine Electronics Association NMEA0183 data format can be connected to the camera's ten-pin remote terminal using an MC-35 GPS adapter cord (available separately; pg. 388), allowing information on the camera's current position to be recorded when photographs are taken. Operation has been confirmed with Garmin eTrex and Garmin geko series devices equipped with a PC interface cable connector. These devices connect to the MC-35 using a cable with a D-sub 9-pin connector provided by the manufacturer of the GPS device. See the MC-35 instruction manual for details. Before turning the camera on, set the GPS device to NMEA mode (4800 baud). t MC-35 223
223
t
Using a GPS Unit
Optional Garmin GPS units that conform to version 2.01 or 3.01 of
the National Marine Electronics Association NMEA0183 data
format can be connected to the camera’s ten-pin remote terminal
using an MC-35 GPS adapter cord (available separately; pg. 388),
allowing information on the camera’s current position to be
recorded when photographs are taken. Operation has been
confirmed with Garmin eTrex and Garmin geko series devices
equipped with a PC interface cable connector. These devices
connect to the MC-35 using a cable with a D-sub 9-pin connector
provided by the manufacturer of the GPS device. See the MC-35
instruction manual for details. Before turning the camera on, set
the GPS device to NMEA mode (4800 baud).
MC-35