Nikon 25434 D3 User's Manual - Page 366
Aperture, setting, Menus, playback, Option, Description, right during thumbnail playback
![]() |
UPC - 018208254347
View all Nikon 25434 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 366 highlights
Option Description At the default setting of [Sub-command dial], aperture can only be adjusted with the sub-command dial (or with the main command dial if [On] is selected for [Change main/ sub]). If [Aperture ring] is selected, aperture can only be Aperture setting adjusted with the lens aperture ring and the camera aperture display will show aperture in increments of 1 EV (aperture for type G lenses is still set using the sub-command dial). Live view is not available when [Aperture ring] is selected and a CPU lens with an aperture ring is attached. Note that regardless of the setting chosen, the aperture ring must be used to adjust aperture when a non-CPU lens is attached. At the default setting of [Off ], the multi selector is used to choose the picture displayed during full-frame playback, highlight thumbnails, and navigate menus. If [On] is selected, the main command dial can be used to choose the picture displayed during full-frame playback, move the cursor left or Menus and playback right during thumbnail playback, and move the menu highlight bar up or down. The sub-command dial is used to display additional photo information in full-frame playback and to move the cursor up or down during thumbnail playback. While menus are displayed, rotating the sub- command dial right displays the sub-menu for the selected option, while rotating it left displays the previous menu. To make a selection, press 2, the center of the multi selector, or J. U 340
![](/manual_guide/products/nikon-25434-d3-users-manual-41c210f/366.png)