Nikon 4799 F6 Instruction Manual - Page 163
Set TTL-BL.
UPC - 018208017997
View all Nikon 4799 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 163 highlights
3 Set the flash sync mode. 4 Set TTL-BL. • Set the power switch of the Speedlight to ON and set the flash mode to TTL auto flash. 5 Check the display in the LCD panel. • Confirm that the indicator (SB-800) or (SB-600) for i-TTL Balanced Fill-Flash appears in the LCD panel. If this indication does not appear in the LCD panel, press the MODE button until it appears. 6 Compose picture, focus and confirm the indication in the viewfinder. • Lightly press the shutter release button and confirm the in-focus / indicator and ready-light indicator fi appears in the viewfinder. 7 Confirm the flash shooting distance range and shoot. • If the ready-light blinks approx. 3 sec. after full flash output, underexposure may have occurred. Check the focus distance, aperture or flash shooting distance range and shoot again. • When using a Speedlight, make sure to read its instruction manual as well. CSM e1: Auto FP High-Speed Sync can be set, or 1/60 to 1/250 sec. can be selected as the fastest limit for the sync shutter speed (x 104). CSM e2: 30 to 1/60 sec. can be selected as the slowest limit for the sync shutter speed in Programmed Auto or Aperture-Priority Auto (x 104). Flash Photography 163