Nikon 4799 F6 Instruction Manual - Page 185

Power source Power switch Battery holder MS-41 provided (two 3V lithium batteries); optional Multi Power Battery Pack MB-40 and AA-type battery holder MS-40 available (for eight alkaline-manganese, lithium or Ni-MH batteries, or one Rechargeable Li-ion Battery EN-EL4 with optional Battery Chamber Cover BL-3); built-in backup battery for internal clock Power ON, OFF and LCD panel illuminator on position Exposure meter Auto meter shut-off 8 sec. after power turned on if no operations are performed; activated by lightly pressing shutter release button or pressing AF start button after power is turned on Battery power confirmation N for sufficient power; ˜ indicates batteries has began exhaustion; M indicates low battery power; blinking M indicates batteries are j exhausted; no indication/symbol appears when batteries are completely exhausted or improperly installed Usable number of The usable number of film roll is tested under following conditions by 36-exposure film Nikon rolls per set of Test 1 fresh batteries Camera setting: Using an AF-S VR 24-120mm f/3.5-5.6G ED lens, Vibration Reduction function on, in Continuous Servo AF with film advance mode at S and shutter speed of 1/250 sec. Autofocus operation: After lightly pressing the shutter release button for 8 sec., autofocus operation covers the full range from infinity (∞) to the closest distance and back to infinity (∞) before each shot. After the exposure meter automatically turns off, the same operation follows for the next shot. Battery Temperature 3V lithium AA-type alkaline-manganese (with MB-40) AA-type Ni-MH (with MB-40) AA-type lithium (with MB-40) Rechargeable Li-ion Battery EN-EL4 (with MB-40) At 20°C/68°F At -10°C/14°F Approx. 15 Approx. 6 Approx. 10 Approx. 1 Approx. 30 Approx. 45 Approx. 30 Approx. 35 Approx. 35 Approx. 25 Miscellaneous 185