Nikon 4799 F6 Instruction Manual - Page 179

With SB-800/SB-600, perform Auto FP High-Speed Sync by setting

Page 179 highlights

Remedy Page • In P mode, use ND filter. 65 • In S mode, select a faster shutter speed. 67 • In A mode, select a smaller aperture (larger f-number). 69 (If the warning indication remains after performing the above remedies in S or A mode, use an ND filter as well.) • In P mode, use flash. 65 • In S mode, select a slower shutter speed. 67 • In A mode, select a larger aperture (smaller f-number). 69 (If the warning indication remains after performing the above remedies in S or A mode, use flash as well.) • When the subject is bright, use an ND filter; when the subject is dark, use 67, 69, flash. 71 • Cancel buLb by selecting a shutter speed of 30 sec. or faster, or select M 66, 70 mode to perform Long Time Exposure. • If non-CPU lens is attached, set the exposure mode to A or M. 65, 67, 68, 70 • Release the shutter as is to take a flash picture. (Shutter speed 104 automatically shifts to 1/250 sec.) • With SB-800/SB-600, perform Auto FP High-Speed Sync by setting 162 Custom Setting "e1: Flash sync speed" to "1/250 (FP auto)". • Shoot again after confirming focus distance, aperture or flash shooting 156, distance range. 163 • Release shutter again. If the warning indication remains, or this warning - appears frequently, contact an authorized Nikon dealer or service center. • Turn the power switch off once and on again. Warning indication 120 disappears and additional data will not be recorded until the data in the memory is erased. Miscellaneous • Use a Speedlight equipped with Red-Eye Reduction function. 159, 160 179

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192

179
Miscellaneous
Page
65
67
69
65
67
69
67, 69,
71
66, 70
65, 67,
68, 70
104
162
156,
163
120
159,
160
Remedy
In P mode, use ND filter.
In S mode, select a faster shutter speed.
In A mode, select a smaller aperture (larger f-number).
(If the warning indication remains after performing the above remedies in
S or A mode, use an ND filter as well.)
In P mode, use flash.
In S mode, select a slower shutter speed.
In A mode, select a larger aperture (smaller f-number).
(If the warning indication remains after performing the above remedies in
S or A mode, use flash as well.)
When the subject is bright, use an ND filter; when the subject is dark, use
flash.
Cancel
buLb
by selecting a shutter speed of 30 sec. or faster, or select M
mode to perform Long Time Exposure.
If non-CPU lens is attached, set the exposure mode to A or M.
Release the shutter as is to take a flash picture. (Shutter speed
automatically shifts to 1/250 sec.)
With SB-800/SB-600, perform Auto FP High-Speed Sync by setting
Custom Setting
e1: Flash sync speed
to
1/250 (FP auto)
.
Shoot again after confirming focus distance, aperture or flash shooting
distance range.
Release shutter again. If the warning indication remains, or this warning
appears frequently, contact an authorized Nikon dealer or service center.
Turn the power switch off once and on again. Warning indication
disappears and additional data will not be recorded until the data in the
memory is erased.
Use a Speedlight equipped with Red-Eye Reduction function.