Nikon 4800 User Manual - Page 22
Turning the Camera On, Auto Power Off Standby Mode, Auto off, The Power-on Lamp
UPC - 018208255207
View all Nikon 4800 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 22 highlights
Turning the Camera On Press the power switch until the power-on lamp lights. The first time the camera is turned on, the language-selection dialog shown opposite will be displayed; choose a language and set the time and date as described on the following pages. First Steps Turning the Camera Off To turn the camera off, press the power switch again. The camera is off when the power-on lamp is off. Do not remove the battery or memory card or disconnect the AC adapter until the power-on lamp has gone out. Auto Power Off (Standby Mode) If no operations are performed for one minute, the monitor and electronic viewfinder will turn off automatically and the camera will enter standby mode to reduce the drain on the battery. While the camera is in standby mode, the power-on lamp will flicker. The camera will be reactivated when you: • Press the power-on switch • Press the button or press the shutter-release button halfway • Press the button to play pictures back • Press the button to display the menu for the current mode • Rotate the mode dial to select a new mode The length of time before the camera enters standby mode can be changed using the Auto off option in the setup menu ( 98). If no operations are performed for three minutes after the camera enters standby mode, the camera will turn off automatically and the power-on lamp will go out. The Power-on Lamp The power-on lamp shows camera status as follows: Power-on lamp On Flickers Blinks Off Camera On Auto power off (standby mode) Battery exhausted ( 15) Off 12