Nikon COOLPIX P600 Product Manual - Page 205

Display Cause/Solution A • There are no images available for a slide All images are hidden. • show, etc. There are no images that can be displayed on - the image selection screen for deletion. This image cannot be The image is protected. deleted. Disable protection. E50 Raise the flash. • When the scene mode is Scene auto 43 selector, you can take an image even if the flash is lowered but the flash will not fire. • When the scene mode is Night portrait or 42, 46 Backlighting with HDR set to Off, you must raise the flash to take an image. No access. The camera could not receive the communication signal from the smart device. Select Connect to smart device in the Wi-Fi options menu, and wirelessly connect the camera and smart device again. 98, E58 Could not connect. The camera failed to establish the connection while receiving the communication signals from the smart device. Select a different channel for 98, E58 Channel in Options in the Wi-Fi options menu and establish the wireless connection again. Wi-Fi connection terminated. A cable was connected to the camera while the camera and smart device were wirelessly connected, the battery level became low, or the connection was aborted due to poor 98, E58 connectivity. Check the status of the camera and establish the wireless connection again. Lens error A lens error occurred. Turn the camera off and then on again. If the error persists, contact your retailer or Nikon- 26 authorized service representative. Communications error An error occurred while communicating with the printer. Turn the camera off and reconnect the USB cable. E14 System error An error occurred in the camera's internal circuitry. Turn the camera off, remove and reinsert the battery, and turn the camera on. If the error 26 persists, contact your retailer or Nikonauthorized service representative. Reference Section E79