Nikon COOLPIX S3600 Product Manual - Page 175

Error Messages

Page 175 highlights

Error Messages Refer to the table below if an error message is displayed. Display Cause/Solution A Battery temperature is elevated. The camera will turn off. The camera will turn The camera turns off automatically. Wait until the camera or battery temperature has cooled before resuming use. - off to prevent overheating. Memory card is write The write-protect switch is in the "lock" position. Slide the protected. write-protect switch to the "write" position. - This card cannot be used. This card cannot be read. An error occurred while accessing the memory card. • Use an approved card. • Check that the terminals are clean. • Confirm that the memory card is correctly inserted. 14, F20 The memory card has not been formatted for use in the camera. Card is not formatted. Format card? Formatting deletes all data saved on the memory card. If you need to keep copies of any images, make sure to select No and save the copies to a computer or other medium before F5 formatting the memory card. Select Yes and press the k button to format the memory card. The write-protect switch of the Eye-Fi card is in the "lock" position. - Not available if Eye-Fi card is locked. An error occurred while accessing the Eye-Fi card. • Check that the terminals are clean. 14 • Confirm that the Eye-Fi card is correctly inserted. Reference Section E75

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208

E
75
Reference Section
Refer to the table below if an error message is displayed.
Error Messages
Display
Cause/Solution
A
Battery temperature is
elevated. The camera
will turn off.
The camera turns off automatically. Wait until the camera or
battery temperature has cooled before resuming use.
The camera will turn
off to prevent
overheating.
Memory card is write
protected.
The write-protect switch is in the “lock” position. Slide the
write-protect switch to the “write” position.
This card cannot be
used.
An error occurred while accessing the memory card.
Use an approved card.
Check that the terminals are clean.
Confirm that the memory card is correctly inserted.
14,
F
20
This card cannot be
read.
Card is not formatted.
Format card?
The memory card has not been formatted for use in the
camera.
Formatting deletes all data saved on the memory card. If you
need to keep copies of any images, make sure to select
No
and save the copies to a computer or other medium before
formatting the memory card. Select
Yes
and press the
k
button to format the memory card.
F
5
Not available if Eye-Fi
card is locked.
The write-protect switch of the Eye-Fi card is in the “lock”
position.
An error occurred while accessing the Eye-Fi card.
Check that the terminals are clean.
Confirm that the Eye-Fi card is correctly inserted.
14