Nikon COOLPIX S3600 Product Manual - Page 188

Technical Notes and Index, Problem, Cause/Solution, Time zone

Page 188 highlights

Problem The camera turns off without warning. Monitor is blank. Monitor is hard to read. Date and time of recording are not correct. Cause/Solution • The camera automatically turns off to save power (auto off function). • The camera and battery may not work properly at low temperatures. • The inside of the camera has become hot. Leave the camera off until the inside of the camera has cooled, and then try turning it on again. • The camera turns off if the USB cable connecting it to a computer or printer is disconnected. Reconnect the USB cable. • The camera is off. • The battery is exhausted. • The camera has entered standby mode to save power. Press the power switch, shutter-release button, A button, c button, or b (e movierecord) button. • The flash lamp flashes while the flash is charging. Wait for the flash to charge. • The camera and computer are connected via the USB cable. • The camera and TV are connected via an audio video cable. • Adjust the monitor brightness. • The monitor is dirty. Clean the monitor. • If the camera clock has not been set, the "Date not set" indicator flashes during shooting and movie recording. Images and movies recorded before the clock is set are dated "00/00/0000 00:00" and "01/01/2014 00:00" respectively. Set the correct time and date for Time zone and date in the setup menu. • The camera clock is not as accurate as ordinary watches or clocks. Periodically compare the time of the camera clock with that of a more accurate timepieces, and reset as required. A 21 F4 - 75, 80, E21 20 20 21 45 75, 80 75, E19 73, E62 F6 16, 73, E60 Technical Notes and Index F8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208

F
8
Technical Notes and Index
The camera turns off without
warning.
The camera automatically turns off to save
power (auto off function).
The camera and battery may not work properly
at low temperatures.
The inside of the camera has become hot. Leave
the camera off until the inside of the camera has
cooled, and then try turning it on again.
The camera turns off if the USB cable
connecting it to a computer or printer is
disconnected. Reconnect the USB cable.
21
F
4
75, 80,
E
21
Monitor is blank.
The camera is off.
The battery is exhausted.
The camera has entered standby mode to save
power. Press the power switch, shutter-release
button,
A
button,
c
button, or
b
(
e
movie-
record) button.
The flash lamp flashes while the flash is
charging. Wait for the flash to charge.
The camera and computer are connected via
the USB cable.
The camera and TV are connected via an audio
video cable.
20
20
21
45
75, 80
75,
E
19
Monitor is hard to read.
Adjust the monitor brightness.
The monitor is dirty. Clean the monitor.
73,
E
62
F
6
Date and time of recording
are not correct.
If the camera clock has not been set, the “Date
not set” indicator flashes during shooting and
movie recording. Images and movies recorded
before the clock is set are dated “00/00/0000
00:00” and “01/01/2014 00:00” respectively. Set
the correct time and date for
Time zone and
date
in the setup menu.
The camera clock is not as accurate as ordinary
watches or clocks. Periodically compare the time
of the camera clock with that of a more accurate
timepieces, and reset as required.
16, 73,
E
60
Problem
Cause/Solution
A