Nikon COOLPIX S9900 Reference Manual - Page 122

B Notes About Log Recording • If the date and time are not set, the log cannot be recorded. • Use a fully charged battery to prevent the camera from turning off during log recording. When the battery power becomes exhausted, log recording ends. • Even when the camera is turned off, log recording is continuously performed until the preset time has elapsed if there is still time remaining for log recording. • Log recording ends due to the operations below even when there is time remaining for log recording. - The battery is removed - Record location data in Location data options is set to Off - Reset all in the setup menu is performed - The setting of the internal clock (time zone or date and time) is changed - End log is selected in Create log (E39) of the Location data options menu • Log recording is paused during the operations below. - During continuous shooting - During movie recording - When connected with a USB cable or HDMI cable Log recording is resumed when the above operations are finished. • The log data cannot be recorded when positioning cannot be performed at all during log recording. • The log data is temporarily stored in the camera. New logs cannot be recorded if the log data remains in the camera. After recording log data, save it to a memory card (E41). • See "Log Data Saved on Memory Cards" (E111) for more information. E40 Reference Section