Nikon COOLPIX S9900 Reference Manual - Page 207

Problem The PictBridge startup screen is not displayed when the camera is connected to a printer. Images to be printed are not displayed. Cannot select paper size with the camera. Cause/Solution With some PictBridge-compatible printers, the PictBridge startup screen may not be displayed and it may be impossible to print images when Auto is selected for Charge by computer in the setup menu. Set the Charge by computer to Off and reconnect the camera to the printer. • The memory card contains no images. • Remove the memory card to print images in the internal memory. The camera cannot be used to select the paper size in the following situations, even when printing from a PictBridge-compatible printer. Use the printer to select the paper size. • The printer does not support the paper sizes specified by the camera. • The printer automatically selects the paper size. A 47, 54 - 7 - Location Data Functions Problem Cause/Solution A Unable to identify the location or it takes time to identify the location. • The camera may not be able to identify the location in some shooting environments. To use the location data functions, use the camera as much as possible in an open-air area. • When positioning for the first time or when E33 positioning was unable to be performed for about 2 hours, it takes a few minutes to obtain the location data. Unable to record When z or y is displayed on the shooting screen, location data on the location data is not recorded. Before shooting shot images. images, check the location data reception. E34 Difference between the actual shooting location and recorded location data. The acquired location data may deviate in some shooting environments. When there is a significant difference in the signals from the positioning satellites, there could be a deviation of up to several hundred meters. E33 Technical Notes and Index F13