Nikon D5 100th Anniversary Edition User Manual - Page 475

Live view ends unexpectedly or does not start: Live view may end automatically to prevent damage to the camera's internal circuits if: • The ambient temperature is high • The camera has been used for extended periods in live view or to record movies • The camera has been used in continuous release modes for extended periods If live view does not start when you press the a button, wait for the internal circuits to cool and then try again. Note that the camera may feel warm to the touch, but this does not indicate a malfunction. Image artifacts appear during live view: "Noise" (randomly-spaced bright pixels, fog, or lines) and unexpected colors may appear if you zoom in on the view through the lens (0 47) during live view; in movies, the amount and distribution of randomly-spaced bright pixels, fog, and bright spots are affected by frame size and rate (0 67). Randomly-spaced bright pixels, fog, or bright spots may also arise as a result of increases in the temperature of the camera's internal circuits during live view; exit live view when the camera is not in use. Can not measure white balance: Subject is too dark or too bright (0 169). Image can not be selected as source for preset white balance: Image was not created with D5 (0 176). White balance bracketing unavailable: • NEF (RAW) or NEF+JPEG image quality option selected for image quality (0 92). • Multiple exposure mode is in effect (0 229). Photographs and movies do not appear to have the same exposure as the preview shown in the monitor during live view: Changes to monitor brightness during live view have no effect on images recorded with the camera (0 51). Effects of Picture Control differ from image to image: A (auto) is selected for sharpening, clarity, contrast, or saturation. For consistent results over a series of photographs, choose another setting (0 183). n 451