Nikon S520 S520 User's Manual - Page 27
Removing the Battery, Turning On and Off the Camera, Auto Power-Off Standby Mode
UPC - 018208261123
View all Nikon S520 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 27 highlights
First Steps Removing the Battery Turn the camera off before removing the battery. To eject the battery, open the battery-chamber/ memory card slot cover and slide the battery latch in the direction shown 1. The battery can then be removed by hand 2. • Note that the battery may become hot during use; observe due caution when removing the battery. Turning On and Off the Camera To turn on the camera, press the power switch. The power-on lamp (green) will light, and the monitor will turn on. To turn off the camera, press the power switch again. • If the camera is turned off, hold down c to turn the camera on in playback mode. Inserting the Battery D Auto Power-Off (Standby Mode) The monitor will dim to reduce the drain on the battery if no operations are performed for about five seconds. The monitor will brighten when camera controls are used. At default settings, the monitor will turn off altogether if no operations are performed for about a minute during shooting and playback. The camera will turn off automatically if no operations are performed for another three minutes (A 115). 15