Nokia C5 Endi User Manual - Page 5

Insert SIM and memory card

Page 5 highlights

glass breaks, do not touch the glass parts of the device or attempt to remove the broken glass from the device. Stop using the device until the glass is replaced by authorized service personnel. Do not connect to products that create an output signal, as this may damage the device. Do not connect any voltage source to the audio connector. If you connect an external device or headset, other than those approved for use with this device, to the audio connector, pay special attention to volume levels. Parts of the device are magnetic. Metallic materials may be attracted to the device. Do not place credit cards or other magnetic stripe cards near the device for extended periods of time, since the cards may be damaged. 5 Insert SIM and memory card 1. Open the SIM and memory card tray: push the tray opener pin in the tray hole and slide the tray out. 2. Put the nano-SIM in the SIM slot on the tray with the contact area face down. 3. If applicable, put the memory card (sold separately) in the memory card slot. 4. Slide the tray back in.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29

5
glass breaks, do not touch the glass parts of the device or attempt to remove
the broken glass from the device. Stop using the device until the glass is
replaced by authorized service personnel.
Do not connect to products that create an output signal, as this may damage
the device. Do not connect any voltage source to the audio connector. If you
connect an external device or headset, other than those approved for use
with this device, to the audio connector, pay special attention to volume
levels.
Parts of the device are magnetic. Metallic materials may be attracted to the
device. Do not place credit cards or other magnetic stripe cards near the
device for extended periods of time, since the cards may be damaged.
Insert SIM and memory card
1.
Open the SIM and memory card tray: push the tray opener pin in
the tray hole and slide the tray out.
2.
Put the nano-SIM in the SIM slot on the tray with the contact area
face down.
3.
If applicable, put the memory card (sold separately) in the memory
card slot.
4.
Slide the tray back in.